What is HYSPEC?
HYSPEC is Castrol’s new hybrid performance standard. It is important to understand that HYSPEC is not a new product or a competitor comparison; rather, it is Castrol’s internal standard that sets a benchmark that has been chosen to measure our hybrid oils against. This internal standard enables us to prove that our hybrid oils perform against the three HYSPEC factors: contaminants, engine intermittency and system efficiency.
Hybrid types
There are 3 different hybrid types: Mild, Full and Plug-in hybrids.
Mild hybrids: Power derives mainly from the internal combustion engine; electric energy serves as a boost.
Full hybrids: Self-charging hybrids which have powerful electric motors, making them capable of providing a significant electric-only range.
Plug-in hybrids: Similar to full hybrids, but the electric autonomy is further enhanced with the option of external recharge.
Common issues hybrids face
Hybrids operate differently from conventional cars. The switch between the internal combustion engine (ICE) and electric motor challenges oil in three key areas: contaminants, engine intermittency and system efficiency.
Contaminants: Hybrid engines run at cooler temperatures, which can lead to fuel and water build-up in the oil. For example, at cooler temperatures, when the engine does not get hot enough to burn off any built-up moisture, this can lead to the formation of engine sludge and emulsions, causing oil disruption and engine oil deterioration. Fuel dilution also reduces the oil viscosity, which in turn means less protection against friction and more wear.
Engine intermittency: Hybrids repeatedly switch between the electric motor and ICE, so the engine can operate at low speeds one moment, only to ramp up to high engine speeds the next. In situations like this, if the oil cannot keep up with changes in speed and temperature, critical parts of the engine might not have enough oil coverage, which increases the risk of metal-to-metal contact, wear, damage and a decrease in engine performance over time.
System efficiency: Temperatures in hybrid vehicles are generally lower than in conventional vehicles due to intermittent operation between the ICE and the electric motor. As a result, the oil may not reach its optimum operating temperature and will not be as efficient in reducing friction. This would reduce the overall engine efficiency, leading to an increase in fuel consumption and less effective charging of the battery.
HYSPEC benefits
After 25 years of development and partnering with OEMs and motorsport groups, Castrol has collected over 2 billion data points and created its own hybrid standard, HYSPEC, which sets the benchmark for measuring our oils for hybrids across those three critical areas – contaminants, engine intermittency and system efficiency – delivering a greater than or equal to 25%* average benefit across the results from the three areas and Castrol’s bespoke test (MTM + Water method). Castrol oils featuring the HYSPEC logo demonstrate at least a 25%* benefit against the HYSPEC standard in those 3 critical areas:
Contaminants: HYSPEC oils are high performing oils that control impurities and contaminants, maintaining optimal performance and reducing engine wear risk.
Engine intermittency: HYSPEC oils have been tested through wear, stability and cold temperature monitoring to ensure they offer high performance and wear protection when changing between ICE and electric motor and vice versa.
System efficiency: HYSPEC oils contribute to system efficiency, benefiting fuel economy** and overall system efficiency.
OK, but is it all about efficiency and not performance?
Not at all! World-leading motorsport teams endorse Castrol HYSPEC, including the BWT Alpine F1 Team and Ford M-Sport WRC. This sets an extreme environment where maximum performance is critical and where Castrol oils are tested, giving us insights which can then be applied on the road.
The HYSPEC range
Refer to the Table of Contents in your Castrol Product Catalogue to discover the full range of HYSPEC tested products.
* Compared to minimum requirements set in industry specifications and Castrol bespoke testing relevant to hybrid vehicle types, covering contaminants, engine intermittency and system efficiency.
** Fuel economy results under road conditions may vary according to vehicle type, driving conditions and style.
Leave a comment
Your email address will not be published. Required fields are marked *